Pro RIP Kit for 2500 4WD/AWD Sprinter Revel 2021+

Unleash The Revel's Full Potential 

If you’ve pushed your Revel beyond the pavement and beyond the limits of the factory suspension, it’s time to install the best system available. The Pro RIP Kit is built for serious terrain, serious payloads, and serious confidence. This is Agile Off-Road’s most robust RIP Kit, enhanced with upper and lower shear brackets to reinforce rear shock mounts and reduce long-term wear under extreme use.

This isn’t overkill, it’s the upgrade your Revel was born to run. Whether you’re towing, overlanding, or navigating technical trails with a loaded rig, this kit transforms the way your Revel handles everything from washboards to mountain switchbacks.

Key Benefits:
Rear Shock Reinforcement
Upper and lower shear brackets prevent failure and fatigue at the shock mounting points which are essential for Revels carrying extra weight or navigating rocky terrain.

Heavy-Duty Damping Control
FOX 2.5 rear shocks are tuned for overland Sprinter loads, offering larger oil volume and fade resistance for off-grid travel.

Enhanced Steering & Front-End Stability
Bilstein B6 front struts and Agile’s front auxiliary shock kit absorb front-end impacts and reduce braking dive, improving driver control in off-road conditions.

Support for Heavy Builds
Precision-rated leaf springs are matched to your Revel’s real-world weight, keeping it level, balanced, and trail-ready no matter what you’re hauling.

Trail-Tested Durability
This system is designed for long-haul, high-impact travel. Every component is bolt-on and built to withstand thousands of miles of backcountry punishment.

What’s Included:
FOX 2.5 Performance Series Rear Shocks
Built for rugged use and long-haul reliability. Tuned for Revel-sized payloads and terrain.

Rear Upper & Lower Shear Brackets
Reinforces the rear shock mounts, preventing flex and fatigue over time—especially critical for Revels carrying gear and water weight.

Bilstein B6 Front Struts
Proven monotube design to boost steering response and control under load.

Agile Front Auxiliary Shock Kit
Works in tandem with the struts to soak up washboard vibration and reduce nose dive.

Coil Assist Kit + Coil Covers
Front-end support that improves handling and protects spring hardware from road debris.

Rear Brake Line Protection Plate
Shields critical lines from trail damage, because every Revel should be ready for rocks and rough roads.

Custom Rear Leaf Springs
Select your spring rate based on actual rear axle weight (4200, 4700, or 5400 lbs). We’ll help you choose the right spec.

Heavy-Duty Leaf Spring U-Bolts
Included for clean, secure installation with zero shortcuts.

Wheel Spacer Kit
Improves rear-end stance, eliminates rubbing with larger tires, and boosts high-speed stability.

This Is Not Just a Lift
Yes, your Revel will gain about 2 inches of rear lift—but that’s a byproduct, not the goal. The Pro RIP Kit is designed to increase performance, not just height. Expect better suspension travel, improved geometry, and true off-road capability that stays comfortable on the highway.

Fitment & Requirements
Fits 2019+ Winnebago Revel on the Mercedes Sprinter 2500 4WD or AWD platform

Choose your spring rate based on your rig’s actual rear axle weight

Select correct wheel hardware (16mm or 20mm) depending on factory or aftermarket wheels

Professional installation strongly recommended due to precision requirements for shear bracket mounting and front-end tuning

Before You Buy:
Weigh Your Revel
Get a loaded weight on your rear axle—this is critical for spring rate selection. If you’re running lithium, roof racks, bikes, or gear, we’ll dial in the best setup.

Know Your Clearance
The Pro RIP Kit raises the van’s ride height. Confirm garage or parking structure clearances before installation.

Let Us Handle It
Our install team knows Revels. We torque every component, dial in ride height, align the system, and return your van detailed and road-ready.

Installed by Wolf Pack Overland
When you book your Pro RIP Kit with Wolf Pack Overland, you’re getting more than installation—you’re investing in precision setup and long-term performance. Every Revel build includes:

• Spring rate consultation and load analysis
• Full install with all torque specs verified
• Rear shear bracket mounting and reinforcement
• Laser alignment and ride-height tuning
• Interior and exterior van detail included
• Lifetime installation support from Revel specialists

Why We Trust Agile Off-Road
Agile’s RIP Kits are the gold standard in Sprinter suspension. The Pro version represents the ultimate expression of that system—built for full-time travelers, remote explorers, and serious Revel owners who don’t settle.

• FOX 2.5 shocks engineered for commercial-duty off-road use
• Custom-tuned components tested across thousands of trail miles
• Reinforced brackets built to go farther and last longer

Ready to Equip Your Revel for Anything?
If you want your Revel to perform like a purpose-built overlander—and stay comfortable doing it—this is the system.

Call 360-800-5439 or email info@wolfpackoverland.com to confirm your configuration and reserve your installation. Limited Pro RIP Kit slots are available each month.