Race RIP Kit for 2500 4WD/AWD Sprinter 2021+

When you’ve maxed out your build, your payload, and your ambition, the Race RIP Kit is the last suspension upgrade your Sprinter 2500 will ever need. This system includes FOX Factory Race Series internal and external bypass shocks, front coilover conversion, reinforced shear brackets, and custom-tuned leaf springs all engineered to handle punishing terrain, long-haul travel, and the most demanding conditions.

This is Agile Off-Road’s most advanced Ride Improvement Package, delivering full adjustability, precision control, and race-level performance for Sprinter 2500 vans that go where others can't.

Key Benefits:
Race-Bred Damping Performance
FOX Factory Race Series shocks give you fine-tuned rebound and compression adjustability. Smooth out harsh impacts, control body motion, and optimize handling based on your terrain and travel style.

Total Front-End Control
Bilstein B6 struts combined with FOX 2.0 bypass auxiliary shocks and Agile’s coilover conversion deliver unmatched responsiveness up front. Dive less, steer tighter, and drive harder.

Rear Shock Mount Reinforcement
Upper and lower shear brackets provide structural support where the factory Sprinter chassis is weakest—preventing long-term wear and fatigue under extreme conditions.

Weight-Matched Leaf Springs
Rear leaf packs are custom-rated to your actual axle weight, ensuring balanced ride height and confident performance even under full loads.

Full System Integration
No mix-and-match guesswork. Every component is selected and tuned specifically for Sprinter 2500 4WD/AWD platforms running overland or expedition setups.

What’s Included:
FOX 2.5 Internal Bypass Rear Shocks
Fully adjustable damping. Built for heat dissipation and high-load travel.

FOX 2.0 External Bypass Front Auxiliary Shocks
Precision-tuned control and adjustability. External dials let you fine-tune performance on the fly.

Bilstein B6 Front Struts + Coilover Conversion
Adds coilover function to the front end for greater support, smoother control, and better front-to-rear balance.

Rear Upper & Lower Shear Brackets
Reinforces the rear shock tower against flex, fatigue, and failure during extreme articulation.

Front Auxiliary Bracket Kit
Custom mounts for the FOX bypass shocks—engineered for the Sprinter chassis.

Custom Leaf Springs (Weight Rated)
Choose from 4200, 4700, or 5400 lb options based on your rear axle weight. We’ll help you select the best match.

Heavy-Duty Leaf Spring U-Bolts
Grade-8 hardware included for secure, clean installation.

Coil Assist Kit + Coil Covers
Front-end boost and spring protection for rough environments.

Rear Brake Line Protection Plate
Trail-ready safeguard for critical braking components.

Hub-Centric Wheel Spacer Kit + Stud Conversion
Improves stance, track width, and high-speed stability with upgraded mounting hardware.

This Is Not a Lift Kit
Yes, your Sprinter will sit a little taller—but this kit is designed for suspension control, not just height. The Race RIP Kit increases wheel travel, corrects geometry, manages weight better, and allows you to tune your van’s suspension for any road, trail, or expedition.

Fitment & Requirements
Fits Sprinter 2500 4WD & AWD platforms from 2007–2024 (NCV3 & VS30)

Approx. rear lift: ~2" depending on load

Choose correct spring rate and wheel stud size (16mm or 20mm)

Professional installation highly recommended due to adjustable shock systems and bracket mounting

Ships via freight due to component size

Before You Buy:
Weigh Your Rig
We need your rear axle weight to match spring rate and ride height. We’ll walk you through the selection process if needed.

Understand Your Height
Expect a bit of lift—check your garage, overhang, and parking setup before booking.

Let Us Install It Right
With high-end shocks and reinforced hardware, this system requires precision installation. We install it to spec—dialed, aligned, and tested.

Installed by Wolf Pack Overland
We’ve installed Race RIP Kits on expedition rigs, high-performance tourers, and full-time overlanders. When you book with us, you get:

• Axle weight review + spring selection
• Shock installation + adjustment walkthrough
• Front coilover conversion + ride-height tuning
• Full laser alignment and final test drive
• Interior + exterior van detail
• Lifetime install support

We’ve built hundreds of high-performance Sprinters. Let’s build yours next.

Why We Trust Agile Off-Road
Agile’s Race RIP Kit combines the most advanced FOX shocks with proven Bilstein reliability, precision brackets, and travel-tested geometry. No fluff. Just performance.

• Fully adjustable front & rear bypass damping
• Reinforced chassis protection
• Overland-ready load matching and durability
• Tuned for Sprinter-specific handling and weight profiles

Ready to Race Across the Continent?
If your Sprinter is carrying serious weight, hitting serious terrain, and covering serious miles—the Race RIP Kit is the setup you need.

Call 360-800-5439 or email info@wolfpackoverland.com to lock in your build slot. Installations are limited and booked in advance.