Need Professional Installation? We're here to help.
Custom RIP Kit for 3500 4WD/AWD Sprinter Ekko 2021+
Online Exclusive – Designed by Wolf Pack Overland
*Price includes Installation in Issaquah, WA*
If you’ve maxed out your Ekko build with Super Singles, rear carrier, full lithium bank, roof gear and you still want to explore deep, remote terrain with confidence, the Pro RIP Kit is the final step. Built using Agile Off-Road’s best components and upgraded to meet the demands of full-time, full-load travel, this is the most capable suspension system available for the Winnebago Ekko.
This system delivers fade-free control, increased travel, and the kind of ride quality you’d expect from a trophy truck, not a loaded Class C RV.
Key Benefits:
Race-Level Rear Shock Control
FOX 3.0 internal bypass shocks with remote reservoirs are built for high-speed desert use and heavy payloads. They manage heat, rebound, and compression across varied terrain like nothing else.
Extreme Load Stability
Custom-spec heavy-duty rear leaf springs rated up to 8,000 lbs ensure your Ekko stays level and composed—whether you’re hauling extra batteries, e-bikes, or off-grid gear for two.
Precision Steering & Front Control
The upgraded front suspension (Bilstein B6 struts + Agile’s Front Aux Shock Kit + coil assist) improves turn-in response and keeps the nose from diving on descents or braking under load.
Maximum Ground Clearance
Includes Agile’s geometry-corrected lift block system for 2–3" of rear lift, helping you clear rough trails, steep approaches, and uneven camp terrain.
Long-Term Durability
From industrial-grade bushings to reinforced mounting brackets, every component in the Pro kit is selected for long-haul reliability under full load.
What’s Included:
FOX 3.0 Internal Bypass Rear Shocks with Remote Reservoirs
Engineered for extreme use with added volume for superior heat dissipation and progressive damping across travel zones.
Heavy-Duty Rear Leaf Springs (Up to 8,000 lbs)
Multi-leaf pack designed for ultra-heavy Ekkos. Choose the spring rate that matches your van’s actual loaded weight.
Bilstein B6 Front Struts
Trusted for years by overland travelers, Bilsteins provide stiffness, stability, and improved road feel in all conditions.
Agile Off-Road Front Auxiliary Shock Kit
Takes pressure off the struts, increases front-end control, and handles hard hits without compromising steering response.
Coil Assist Kit + Protective Coil Covers
Strengthens front suspension support for gear-heavy setups. Reduces nose dip and sag.
High-Clearance Rear Lift Block Kit
Lifts the rear 2–3 inches while correcting pinion angle and maintaining driveline safety.
Agile Wheel Spacer Kit (Rear)
Widen your stance, eliminate tire rub, and improve high-speed stability—especially with Super Single conversions.
Heavy-Duty Mounting Hardware
Every bolt, bracket, and bushing is included—nothing overlooked, nothing reused.
This Is Not a Lift Kit
The Pro RIP Kit is a full suspension system—designed, tested, and tuned for rigs at the upper edge of capability. It redefines what a Sprinter-based RV can do in terms of ride quality, weight handling, and terrain adaptability. If you’re looking for a cosmetic lift, this isn’t for you. If you’re looking for total control—this is it.
Fitment & Requirements
- Compatible with 2021+ Winnebago Ekko on Mercedes Sprinter 3500 chassis (4WD or AWD)
- Rear spring options for 7000, 7500, and 8000 lbs
- Not for dually configurations
- Requires weight-based spring selection (we help you choose the right one)
- Raises front 1–2" and rear 2–3" depending on load
Before You Buy:
Weigh Your Rig
Weigh your rear axle fully loaded (passengers, gear, water, batteries, storage). We’ll match your kit to your actual travel weight for optimal performance.
Know Your Clearance
This system increases vehicle height. Check your garage, parking deck, and overhangs.
Professional Installation Strongly Recommended
FOX 3.0s demand precision in mounting and routing. Our install includes height calibration, torque specs, laser alignment, and final inspection.
Installed by Wolf Pack Overland
This isn’t just an install—it’s a full performance upgrade for your rig. When you book your Pro RIP Kit install with us, you get:
- Load analysis and custom spring selection
- Precision installation with torque verification
- Ride-height calibration and full suspension inspection
- Laser alignment included
- Full van detail (inside + out) before we hand back the keys
- Lifetime install support for all components
We’ve worked on more Ekkos than almost anyone in the country and this system is built for those who expect the best.
Why We Designed the Pro RIP Kit
Agile Off-Road makes the best suspension components in the industry. But until now, there’s never been a single package designed to serve elite overlanders and full-timers driving 7,000–8,000 lb rigs over rough terrain.
This is the solution we wanted for our own rigs—so we built it.
- FOX 3.0 Shocks for true bypass control
- Tuned for Super Singles, heavy upgrades, and rear carriers
- Geometry corrected, load-matched, and field tested
Only available through Wolf Pack Overland
Ready to Go All-In?
If you're hauling more than most and going farther than most, the Pro RIP Kit is your next move.
Call 360-800-5439 or email info@wolfpackoverland.com to confirm fitment and book your build slot. We install a very limited number of these each season.