Pro RIP Kit for 2500 4WD/AWD Sprinter 2021+

Built for Sprinter owners who drive farther, carry more, and demand uncompromising capability, the Pro RIP Kit is the most rugged, refined suspension system Agile offers before stepping into full race-grade components.

Designed to support heavy builds and constant off-road use, this kit adds structural reinforcement to your rear suspension with upper and lower shear brackets, solving one of the weakest links in the factory setup. Paired with FOX 2.5 rear shocks, Bilstein front struts, and Agile’s front auxiliary shock system, it’s the total package for serious Sprinter 2500 platforms.

Key Benefits:
Reinforced Rear Shock Mounts
Upper and lower shear brackets prevent flex and failure at the rear shock mounting points—critical for heavy Sprinter builds and trail use.

Fade-Free Rear Suspension Performance
FOX 2.5 rear shocks offer larger oil volume, tuned damping, and long-term consistency under heavy load and aggressive terrain.

Confident Front-End Control
Bilstein B6 struts and Agile’s auxiliary front shocks soak up impacts and reduce dive, giving you sharper steering and better braking feel in technical driving.

Load-Matched Leaf Springs
Choose from multiple rear spring options rated to match your Sprinter’s actual weight—perfect for fully built vans with water tanks, lithium banks, roof gear, and more.

Built for Hard Travel, Bolt-On Install
No fabrication required. All components are designed for the Sprinter 2500 chassis and install using factory mounting points.

What’s Included:
FOX 2.5 Performance Series Rear Shocks
Built for overland and commercial-duty Sprinter platforms. Tuned to manage weight, terrain, and rebound control in demanding conditions.

Rear Upper & Lower Shear Brackets
Reinforce the shock towers at their most stressed points—ideal for rough roads, hard hits, or heavy builds.

Bilstein B6 Front Struts
Proven struts that enhance handling and control without compromising everyday drivability.

Front Auxiliary Shock Kit
A must for any Sprinter tackling backroads or mountain descents. Adds control and reduces harsh impacts.

Coil Assist Kit + Coil Covers
Supports added front-end weight and protects spring components from corrosion or impact.

Rear Brake Line Protection Plate
Adds a layer of safety to exposed lines under the van—especially critical for Sprinters on dirt and gravel routes.

Custom Rear Leaf Springs
Select the right spring based on your loaded rear axle weight (4200 / 4700 / 5400 lbs). We’ll help you pick the correct setup.

Heavy-Duty Leaf Spring U-Bolts
Included for a secure, long-lasting fit.

Wheel Spacer Kit + Stud Conversion
Improves stance, tire clearance, and high-speed handling with 16mm or 20mm hardware options.

This Is More Than a Lift
The Pro RIP Kit increases your Sprinter’s ride height slightly—but the real upgrade is performance. This system improves articulation, supports load, enhances steering feel, and reinforces the entire shock structure. It’s not for show. It’s for going places stock suspension can’t.

Fitment & Requirements
Compatible with Sprinter 2500 4WD & AWD models from 2007–2024 (NCV3 + VS30)

Approximate rear lift: 2–2.5" depending on load

Choose correct spring rate and wheel hardware at checkout

No fabrication required—fully bolt-on

Freight shipping required for leaf springs

Before You Buy:
Weigh Your Van
Fully load your Sprinter (gear, water, people, batteries) and weigh the rear axle. We’ll help you choose the best spring to match your setup.

Know Your Clearance
Increased ride height may limit access to garages or parking structures. Measure before committing.

Professional Installation Strongly Advised
Precision is critical when mounting shear brackets and tuning front-end geometry. We torque, align, and inspect every build.

Installed by Wolf Pack Overland
When we install your Pro RIP Kit, you’re getting a full suspension overhaul, not just parts. Our process includes:

• Rear axle weight review + spring rate selection
• Complete install with shear bracket reinforcement
• Ride-height calibration and 4-wheel alignment
• Post-install inspection and test drive
• Full van detail (interior + exterior)
• Lifetime installation support

We specialize in high-performance Sprinter builds. Let us build yours right the first time.

Why We Trust Agile Off-Road
Agile Off-Road continues to lead Sprinter suspension with engineered solutions for real-world travel. The Pro RIP Kit is the culmination of thousands of off-road test miles, customer feedback, and professional race-inspired tuning.

• FOX 2.5 dampers tuned for overland load
• Custom spring options for every configuration
• Structural upgrades for serious durability

Ready to Go Pro?
If your Sprinter is doing more than grocery runs—this is the suspension system you need.

Call 360-800-5439 or email info@wolfpackoverland.com to schedule installation or confirm fitment. Limited build slots available each month.